10in Full Face Flange Gasket — Red Rubber 150#/125#, 1/8in Thick, 16in OD

Name: 10in Full Face Flange Gasket — Red Rubber 150#/125#, 1/8in Thick, 16in OD
SKU: SH-FF-1000
Price: 12.95 USD
Availability: InStock

SKU: SH-FF-1000

Weight	.25 lbs
Dimensions	18 × 18 × .5 in

Title	Quantity	Price Per Unit
Pre Cut Gasket 15 20 25 Rule	1 - 2	0% $12.95
Pre Cut Gasket 15 20 25 Rule	3 - 5	15% $11.01
Pre Cut Gasket 15 20 25 Rule	6 - 9	20% $10.36
Pre Cut Gasket 15 20 25 Rule	10 +	25% $9.71

QTY	Price
10in Full Face Flange Gasket — Red Rubber 150#/125#, 1/8in Thick, 16in OD quantity	$12.95

Have a Question?

DESCRIPTION
A 10 inch full face gasket in 1/8 in. red rubber, cut to ASME B16.21 for 150 lb flanges. Pipe size is a name, not a measurement — 10 in. pipe is 10-3/4 in. across the outside, which is why the bore reads 10-3/4 in. and the outer edge 16 in.
Measure across your flange face — if it reads 16 in., this is your gasket.
- Fits pipe size — 10 in. nominal
- Outside diameter — 16 in. (matches the flange face)
- Bolt holes — 12, at 1 in.
- Bolt circle — 14-1/4 in.
- Bore — 10-3/4 in.
- Thickness — 1/8 in.
- Material — red rubber (SBR), 70 Shore A, -20°F to 180°F
- Flange class — 150 lb steel or 125 lb cast iron
Fits 150 lb steel and 125 lb cast iron flanges — Class 125 and Class 150 share the same bolt pattern, so one gasket covers both. A Class 300 flange is wider on a different bolt circle and takes a different gasket. Red rubber (SBR) suits water, brine, air and low-pressure service; for oil, fuel, solvents or acids ask for Buna, Viton, EPDM or non-asbestos.

Where a 10 in. goes. Municipal water mains, lift station and wastewater discharge, large irrigation headers and the main chilled-water runs in industrial plants. It is the first size in the range to carry twelve bolts rather than eight, and the first on full 1 in. holes — count twelve holes and you are at a 10 in. or 12 in.
Flanging up a whole pump?The suction flange is normally a size or two bigger than the discharge, so a 10in rarely goes in on its own.
- 8in Full Face Flange Gasket — 13-1/2in OD, 8 bolt holes at 7/8in
- 6in Full Face Flange Gasket — 11in OD, 8 bolt holes at 7/8in
Need another size, a different thickness or Buna, Viton, EPDM or neoprene? We cut the full range 1-1/4in to 12in — call or text 561-414-1046 with your flange dimensions.

Disclaimer: Seal House USA provides aftermarket replacement parts. Any OEM names are used strictly for cross-reference. We are an independent supplier.