3. Pump Repair Kits by Brand

Seal House USA supplies aftermarket repair kits for Fairbanks and Baldor Reliance submersible pump motors. These kits are matched by NEMA motor frame size rather than by pump model — read the frame off the motor nameplate and order to that.

Kits typically include the mechanical seal set plus the O-ring kit, with the exceptions noted below.

Frame sizes covered

140TY — seals only, no O-ring kit 180TY 210T and 210TY 220T — Zoeller configuration 250T and 250TY 256TY — seals only, no O-ring kit 320T and 320TY — supplied with lower seal guard 360T and 360TY 400T — seals only 440T — supplied with lower seal guard

Why frame size matters

Baldor Reliance builds the motor; the pump end may carry a Fairbanks, Fairbanks Nijhuis, Zoeller, or other nameplate. The seal arrangement follows the motor frame, so the frame designation is what determines the kit — not the pump manufacturer's model number. If you have both, send both and we'll confirm.

Ordering help

Not sure of your frame size, or working from a motor with an unreadable nameplate? Call or text 561-414-1046 with what you can read and we'll work it out.

All Fairbanks, Baldor, Reliance, and Zoeller names and part numbers are used for cross-reference only. Seal House USA is an independent aftermarket supplier.

Seal House USA supplies direct-fit Grindex pump repair kits for dewatering, drainage, and sludge submersibles. Kits are built to OEM-equivalent standards or higher.

Kits available

Sally and Salvador — upper seal 712 5600, lower seal 713 9000, SiC/SiC faces with Viton (FKM) elastomers, plus the O-ring set. Tungsten carbide face upgrade available.

Grindex submersibles run upper and lower seals in a shared oil chamber, so both stages should be replaced together — a worn upper seal that lets water into the oil will take out a new lower seal in short order. On heavily abrasive duty, the tungsten carbide upgrade is worth the difference.

Not sure which kit fits? Call or text 561-414-1046 with your full model and serial number.

All Grindex and Xylem names and part numbers are used for cross-reference only. Seal House USA is an independent aftermarket supplier.

Seal House USA supplies complete seal and O-ring service kits for Hydromatic submersible pumps. Each kit includes two mechanical seals plus a full O-ring set, built to OEM-equivalent standards or higher.

Standard build is a Carbon/Ceramic/Buna upper seal with a SiC/SiC lower seal and Buna-N (NBR) O-rings. Alternate face materials are available on request.

Select your exact pump model from the dropdown on the product page.

Two fitment notes

40RDP and 60RDP — specify whether your pump is pre-2005 or 2005-to-current manufacture. The O-rings and gasket changed, and the date determines which kit ships.

S8L — seal configuration varies within the series. Some 25 HP units use a narrow-OD, slotted-seat seal. Confirm your build before ordering.

Need help matching? Call or text 561-414-1046 with your model and serial number.

All Hydromatic and Pentair names and part numbers are used for cross-reference only. Seal House USA is an independent aftermarket supplier.

Seal House USA supplies complete seal and O-ring service kits for Pentair Myers submersible pumps. Each kit includes two mechanical seals plus a full O-ring set, built to OEM-equivalent standards or higher.

Standard build is a Carbon/Ceramic/Buna upper seal with a SiC/SiC lower seal and Buna-N (NBR) O-rings. Alternate face materials are available on request.

Series covered

4V, 4VC, 4VH, and WG series. Select your exact model from the dropdown on the product page — price and seal reference update with your selection.

Matching a Myers model

The brand appears as Myers, F.E. Myers, and Pentair Myers depending on the age of the pump, and model numbers carry suffixes that change the build. Match on the full string from your nameplate, not just the base model.

Matching from a worn part? Send a nameplate photo to info@sealhouseusa.com or call/text 561-414-1046.

All Myers and Pentair names and part numbers are used for cross-reference only. Seal House USA is an independent aftermarket supplier.

Tri-Clover pumps are still running in dairies, breweries, and processing plants across the country, and Seal House USA stocks the seal kits to keep them running. Alfa Laval absorbed the Tri-Clover line years ago, but the pump on your floor still says Tri-Clover and the C-series model number on the casing is still what you order by.

Model references

C114-1 and 114E-80-1A — 3/4" seal size C214 and C216 — 1-1/8" seal size

These run on the 293 seal platform (T-293), shared with Alfa Laval and Waukesha sanitary centrifugals. Carbon or Silicon Carbide faces with EPDM elastomers, food-grade.

Choose Type DG (flush) or Type D (non-flush), seal only or with the Buna housing gasket and impeller pin for a full reseal.

Also written Tri Clover or TriClover. Have the number off the casing but not sure of the seal size? Call or text 561-414-1046.

All Tri-Clover and Alfa Laval names and part numbers are used for cross-reference only. Seal House USA is an independent aftermarket supplier.

Seal House USA supplies food-grade repair kits for Waukesha sanitary centrifugal pumps in the 200 and 2000 series. Each kit includes the mechanical seal and the matching O-ring kit, in materials rated for food, dairy, beverage, and hygienic process service.

Models covered — 1-3/4" seal size

2045, 2065, 2065LV, 2065HV, 2075, 2085, 2085LV, and 2105

Single or double seal

Type 1 single seal — the standard arrangement for most product duty. Type 4 double seal — for applications requiring a flush or barrier fluid between stages.

Which one you need is set by how your pump was built, not by the model number alone, so confirm before ordering. Smaller Waukesha centrifugals run on the 293 seal platform in 3/4" and 1-1/8" sizes.

Also written Waukesha Cherry-Burrell. Matching from a worn seal? Send a photo of the old seal and your pump nameplate to info@sealhouseusa.com or call/text 561-414-1046 — no purchase required.

All Waukesha, Cherry-Burrell, and SPX FLOW names and part numbers are used for cross-reference only. Seal House USA is an independent aftermarket supplier.