Seal Specialists Available — Call or Text Anytime for Technical Support or Part Matching 561-414-1046

ENGINEERED TO FIT. BUILT TO LAST.

my cart
0 items

No products in the cart.

checkout
561.414.1046

Ebara EVMSU / EVMSUL Mechanical Seal — Type 192S, 16mm & 20mm

Ebara 371416183 mechanical seal, 20mm Type 192S, silicon carbide faces, Viton elastomer bellows, EVMSU EVMSUL

Ebara EVMSU / EVMSUL Mechanical Seal — Type 192S, 16mm & 20mm

SKU: N/A

Weight .25 lbs
Dimensions 2 × 2 × 3 in
QTY Price
Have a Question?
  • DESCRIPTION

    The Ebara EVMSU mechanical seal is a Type 192S (T-192S) replacement seal for Ebara EVMSU and EVMSUL vertical multistage pumps, built with silicon carbide against silicon carbide on both faces and Viton (FKM) elastomers — the hard-face, high-temperature build, not a carbon/ceramic substitute. Two shaft sizes cover the range: 16mm for the 1, 3 and 5 series, and 20mm for the 10, 15 and 20 series. Built to OEM-equivalent standards or higher.

    Mechanical seal only — the metal seal, housing and lock collar are not supplied.

    At a Glance

    Seal type Type 192S (T-192S), DIN 24960 / EN 12756 L1K length
    Shaft sizes 16mm (0.630 in.) and 20mm (0.787 in.) — select above
    Configuration Single seal, bi-directional elastomer bellows
    Rotating face Silicon Carbide
    Stationary face Silicon Carbide
    Elastomer Viton (FKM) — to 450°F
    Material code SIC/SIC/VIT
    What’s included Mechanical seal only. The metal seal, housing and lock collar are not supplied
    Ebara EVMSU / EVMSUL – Mechanical Seal Reference
    Find the nominal size on your pump nameplate — the number straight after EVMSU or EVMSUL — then select that shaft size above.
    Select Faces & Elastomer Fits These Pumps Ebara Part Numbers
    16mm Silicon Carbide / Silicon Carbide, Viton (FKM) Ebara EVMSU 1, EVMSU 3 and EVMSU 5, and the EVMSUL 1, 3 and 5 builds — including EVMSUL5-9FS, pump P/N 3437211009 EVMSUL-OSKSU1/3/5
    20mm Silicon Carbide / Silicon Carbide, Viton (FKM) Ebara EVMSU 10, EVMSU 15 and EVMSU 20, and the EVMSUL 10, 15 and 20 builds EVMSU OSKSU 10/15/20
    371416183
    Not sure which size you need? Call or text 561-414-1046 with a photo of your nameplate — no purchase required.

    We have confirmed this seal directly against the Ebara EVMSUL5-9FS nameplate. The series fitment above comes from Ebara’s own OEM drawing. If your plate reads anything else, send us a photo and we will check it before you order rather than after.

    How to find your size

    The number straight after EVMSU or EVMSUL on your nameplate is Ebara’s nominal size, and it is what tells you the seal size.

    • EVMSU 1, EVMSU 3 and EVMSU 5 take the 16mm seal

    • EVMSU 10, EVMSU 15 and EVMSU 20 take the 20mm seal

    The L — as in EVMSUL — means the pump is built in 316 stainless instead of 304. That difference is in the pump’s cartridge, seat and holder, not in this seal element, so it does not change which seal you need.

    Cross references and alternate part numbers

    Find the number stamped on your old seal or printed in your pump manual.

    • Vulcan Type 192S (T-192S) — the DIN 24960 / EN 12756 L1K length version

    • Burgmann MG12 — same elastomer bellows rotary design

    • AES B012

    • US Seal Type VGMC-12 head family — DIN 24960, bi-directional, elastomer bellows

    • Replaces the mechanical seal from Ebara seal kit EVMSUL-OSKSU1/3/5 (16mm) and EVMSU OSKSU 10/15/20 (20mm)

    • Cross-references to Ebara 371416183 (20mm)

    • Confirmed on the Ebara EVMSUL5-9FS vertical multistage pump, pump P/N 3437211009

    Your number not listed? Call or text 561-414-1046 and we will cross it for you.

    Rebuilding an Ebara multistage pump?We stock seals and repair parts across the Ebara range.

    Doing the job yourself? Read How to Replace a Mechanical Pump Seal.

Disclaimer: Seal House USA provides aftermarket replacement parts. Any OEM names are used strictly for cross-reference. We are an independent supplier.

Related products