Seal Specialists Available — Call or Text Anytime for Technical Support or Part Matching 561-414-1046

ENGINEERED TO FIT. BUILT TO LAST.

my cart
0 items

No products in the cart.

checkout
561.414.1046

Ebara Mechanical Seals

  • aquascape tsurumi 14mm double mechanical seal 025

    Ebara 260A Double Mechanical Seal14mm

    Ebara 260A Double Mechanical Seal14mm

    Item #260A

    Ebara 260A Double Mechanical Seal — 14mm (14×30, Upper + Lower)

    Ebara 260A is the direct replacement double mechanical seal for small Ebara submersible pumps built around a 14mm shaft and 30mm seat. This complete upper-and-lower set cross-references to VGM-2971 and W-14HL, and is the same proven seal we supply for Tsurumi 14×30 applications — built to OEM-equivalent standards or higher.

    Both the upper and lower seals run Silicon Carbide against Silicon Carbide (SiC/SiC) with Viton (FKM) elastomers — a hard-face, chemical-resistant build that holds up to grit, fibers, and continuous-duty submersible service far better than carbon-ceramic alternatives.

    At a glance:

    • Shaft size: 14 mm

    • Seat size: 30 mm

    • Configuration: Double seal (upper + lower)

    • Faces: SiC/SiC (upper & lower)

    • Elastomers: Viton (FKM)

    • Manufacturer reference: Ebara 260A

    • Equivalent to: VGM-2971

    • Form: Seal assembly only (O-rings/gaskets sold separately)

    • Applications: Fits small Ebara submersible pumps that use the 14mm shaft and 30mm seat double-seal layout. Because it shares the 14×30 footprint, it also covers the equivalent Tsurumi and Aquascape pond and fountain pumps

    Explore our full line up of OEM seals 

    Looking for more? Shop Pump Repair Kits, Shaft Seals and Pre-Cut Gaskets

    Have questions? Call us anytime- we’re here to help 

    Weight .25 lbs
    Dimensions 1.75 × 1.75 × 1.75 in
  • Tsurumi 20mm double mechanical seal replacement Tsurumi 025-001-00 mechanical seal H-25T 25mm Ebara 260B 25mm mechanical seal

    Ebara 260B Double Mechanical Seal25mm Shaft

    Ebara 260B Double Mechanical Seal25mm Shaft

    Ebara 260B Double Mechanical Seal — 25mm Shaft

    OEM-style Ebara 260B mechanical seal replacement for pump applications using a 25mm shaft. This is a double mechanical seal set (upper + lower) built with a two-stage face combination: CAR/SIC on the upper stage and SIC/SIC on the lower stage for strong wear resistance and long service life in demanding pump duty.

    At a glance

    • Seal type: Ebara 260B

    • Shaft size: 25mm

    • Configuration: Double seal (upper + lower)

    • Face materials: CAR/SIC (upper) + SIC/SIC (lower)

    • Included: Seal assembly only (O-rings/gaskets sold separately unless noted)

    Explore our full line up of OEM seals 

    Looking for more? Shop Pump Repair Kits, Shaft Seals and Gaskets

    Have questions? Call us anytime- we’re here to help 

    Weight .5 lbs
    Dimensions 2.25 × 2.25 × 2 in
  • BJM K2N220 45mm double mechanical seal M01355V, upper and lower set HCP TF840 45mm double mechanical seal F21-0B045NS0000-0, upper and lower set Ebara 260D 45mm double mechanical seal ED560N-M45, upper and lower set surumi H-45X 45mm double mechanical seal 025-000-62, upper and lower set

    Ebara 260D Mechanical Seal45mm Double Seal (ED560N-M45)

    Ebara 260D Mechanical Seal45mm Double Seal (ED560N-M45)

    Ebara 260D Mechanical Seal — 45mm Double Seal (ED560N-M45)

    The Ebara 260D mechanical seal is a direct-fit 45mm double seal set (upper + lower) for Ebara submersible pumps, referenced as ED560N-M45. Equivalent to US Seal VGM-1335V, it is built to OEM-equivalent standards or higher for the same fit and longevity as the original.

    This is the same proven 45mm seal we supply for matching HCP and BJM pumps, listed here under its Ebara reference for easy matching.

    At a glance:

    • Shaft size: 45 mm

    • Configuration: Double seal (upper + lower)

    • Faces: SiC/SiC (upper & lower)

    • Elastomers: Viton (FKM)

    • Manufacturer reference: Ebara 260D / ED560N-M45

    • Equivalent to: US Seal VGM-1335V

    • Form: Seal assembly only (O-rings/gaskets sold separately)

    Built for Ebara submersible pumps using the 45mm double-seal arrangement (260D / ED560N-M45). Matching from a worn seal? Confirm your pump model first, or send a photo of the old seal and your pump nameplate to info@sealhouseusa.com, or call/text 561-414-1046. No purchase required.

    Weight 1 lbs
    Dimensions 3 × 3 × 2.5 in
  • Ebara DMLEU repair kit, double mechanical seal and Buna-N O-ring set for 100DMLEU6152 and 150DMLEU6152 Ebara DML Series double mechanical seal, step shaft, 30/35 40/45 and 45/50 mm, upper and lower seal set

    Ebara DML Series Mechanical SealStep Shaft

    Ebara DML Series Mechanical SealStep Shaft

    Item #N/A

    Ebara DML Series Double Mechanical Seal (Step Shaft)

    The Ebara DML Series mechanical seal is a direct-fit double seal set (upper + lower) for stepped-shaft Ebara submersible pumps — DML, and DMLEU — in 30/35 mm, 40/45 mm and 45/50 mm, covering 3 through 30 HP. Built to OEM-equivalent standards or higher.

    At a Glance

    • Pump family: Ebara DML Series — DML, DMLEU, and HCP AF step-shaft models

    • Configuration: Double mechanical seal, upper and lower for stepped shafts

    • Sizes: 30/35 mm, 40/45 mm, 45/50 mm — select by pump rating

    • Range: 3–30 HP (2.2–22 kW)

    • Faces: Lower silicon carbide vs. silicon carbide; upper carbon vs. ceramic

    • Elastomers: Buna-N (NBR)

    • Replaces: HCP F21-0C045CS0001-0 (45/50 mm)

    • Form: Complete seal assembly — O-rings and gaskets sold separately

    What’s Included:

    • Complete double mechanical seal assembly — upper and lower, stationary seats and rotating faces

    Ebara DML Series Seals — Model Reference
    Find your pump model below, then select that size from the dropdown above to order. The last digit of an Ebara model number is the voltage code — 2 for 208/230 V, 4 for 460 V — and it does not change the seal.
    Size Pump rating Faces & elastomer Fits these models
    30/35 mm 3–5 HP
    2.2–3.7 kW    		 Carbon/Ceramic upper
    SiC/SiC lower
    NBR elastomers    		 80DMLEU62.22
    80DMLEU63.72
    100DMLEU63.72
    100DMLEU63.74
    40/45 mm 7.5–10 HP
    5.5–7.5 kW    		 260B / 560D design
    70 mm lower seat
    NBR elastomers    		 80DMLEU65.52
    100DMLEU67.52
    45/50 mm 15–30 HP
    11–22 kW    		 Carbon/Ceramic upper
    SiC/SiC lower
    NBR elastomers    		 80DMLEU6152
    100DMLEU6114
    100DMLEU6152
    100DMLEU6222
    150DMLEU6152
    100AFE415
    150AFE415
    100AFE422
    150AFE422
    20 HP models — complete kit with O-rings available
    Applications

    DML Series pumps are submersible non-clog sewage and wastewater pumps running both seals in an oil-filled chamber. They are found in municipal lift stations and wastewater treatment plants, commercial and institutional sewage ejection, industrial sump and effluent transfer, and process and agricultural wastewater — solids-bearing water where the lower seal faces abrasives continuously.

    Reading your nameplate

    Ebara model numbers carry the rating in the number itself. On 100DMLEU6152: the first digit is the frequency (6 = 60 Hz), the next two are the rated kW (15 = 15 kW, 20 HP), the last is the voltage code (2 = 208/230 V, 4 = 460 V, 5 = 575 V). Read the middle two digits, find them in the kW column above, and that is your seal.

    Working on an Ebara D-Series pump?This listing is the mechanical seal on its own. If you are rebuilding the seal chamber and need the O-rings with it, check out the Ebara DMLEU Repair kit:

    Not sure which seal your pump takes? See our Ebara repair kit seal guide. or call or text us anytime at 561-414-1046

    Weight .7 lbs
    Dimensions 3 × 3 × 3 in
  • Ebara 371416183 mechanical seal, 20mm Type 192S, silicon carbide faces, Viton elastomer bellows, EVMSU EVMSUL

    Ebara EVMSU / EVMSUL Mechanical SealType 192S, 16mm & 20mm

    Ebara EVMSU / EVMSUL Mechanical SealType 192S, 16mm & 20mm

    Item #N/A

    The Ebara EVMSU mechanical seal is a Type 192S (T-192S) replacement seal for Ebara EVMSU and EVMSUL vertical multistage pumps, built with silicon carbide against silicon carbide on both faces and Viton (FKM) elastomers — the hard-face, high-temperature build, not a carbon/ceramic substitute. Two shaft sizes cover the range: 16mm for the 1, 3 and 5 series, and 20mm for the 10, 15 and 20 series. Built to OEM-equivalent standards or higher.

    Mechanical seal only — the metal seal, housing and lock collar are not supplied.

    At a Glance

    Seal type Type 192S (T-192S), DIN 24960 / EN 12756 L1K length
    Shaft sizes 16mm (0.630 in.) and 20mm (0.787 in.) — select above
    Configuration Single seal, bi-directional elastomer bellows
    Rotating face Silicon Carbide
    Stationary face Silicon Carbide
    Elastomer Viton (FKM) — to 450°F
    Material code SIC/SIC/VIT
    What’s included Mechanical seal only. The metal seal, housing and lock collar are not supplied
    Ebara EVMSU / EVMSUL – Mechanical Seal Reference
    Find the nominal size on your pump nameplate — the number straight after EVMSU or EVMSUL — then select that shaft size above.
    Select Faces & Elastomer Fits These Pumps Ebara Part Numbers
    16mm Silicon Carbide / Silicon Carbide, Viton (FKM) Ebara EVMSU 1, EVMSU 3 and EVMSU 5, and the EVMSUL 1, 3 and 5 builds — including EVMSUL5-9FS, pump P/N 3437211009 EVMSUL-OSKSU1/3/5
    20mm Silicon Carbide / Silicon Carbide, Viton (FKM) Ebara EVMSU 10, EVMSU 15 and EVMSU 20, and the EVMSUL 10, 15 and 20 builds EVMSU OSKSU 10/15/20
    371416183
    Not sure which size you need? Call or text 561-414-1046 with a photo of your nameplate — no purchase required.

    We have confirmed this seal directly against the Ebara EVMSUL5-9FS nameplate. The series fitment above comes from Ebara’s own OEM drawing. If your plate reads anything else, send us a photo and we will check it before you order rather than after.

    How to find your size

    The number straight after EVMSU or EVMSUL on your nameplate is Ebara’s nominal size, and it is what tells you the seal size.

    • EVMSU 1, EVMSU 3 and EVMSU 5 take the 16mm seal

    • EVMSU 10, EVMSU 15 and EVMSU 20 take the 20mm seal

    The L — as in EVMSUL — means the pump is built in 316 stainless instead of 304. That difference is in the pump’s cartridge, seat and holder, not in this seal element, so it does not change which seal you need.

    Cross references and alternate part numbers

    Find the number stamped on your old seal or printed in your pump manual.

    • Vulcan Type 192S (T-192S) — the DIN 24960 / EN 12756 L1K length version

    • Burgmann MG12 — same elastomer bellows rotary design

    • AES B012

    • US Seal Type VGMC-12 head family — DIN 24960, bi-directional, elastomer bellows

    • Replaces the mechanical seal from Ebara seal kit EVMSUL-OSKSU1/3/5 (16mm) and EVMSU OSKSU 10/15/20 (20mm)

    • Cross-references to Ebara 371416183 (20mm)

    • Confirmed on the Ebara EVMSUL5-9FS vertical multistage pump, pump P/N 3437211009

    Your number not listed? Call or text 561-414-1046 and we will cross it for you.

    Rebuilding an Ebara multistage pump?We stock seals and repair parts across the Ebara range.

    Doing the job yourself? Read How to Replace a Mechanical Pump Seal.

    Weight .25 lbs
    Dimensions 2 × 2 × 3 in
  • ebara EVM / Armstrong VMS 198 12.7MM

    Ebara Type 198 Mechanical Seal (T-198 / Type 198)Fits EVM / EVMU / EVMW / EVMU/A Pumps

    Ebara Type 198 Mechanical Seal (T-198 / Type 198)Fits EVM / EVMU / EVMW / EVMU/A Pumps

    Item #N/A

    The Ebara Type 198 mechanical seal (T-198 / T198) is an OEM-style replacement seal for Ebara vertical multistage pumps, with silicon carbide faces on both sides and a direct-fit installation. This listing covers the Ebara EVM, EVMU, EVMW and EVMU/A families in four shaft sizes — select your size from the dropdown above.

    Mechanical seal only — the metal assembly (sleeve and set screws) is not included.

    At a Glance

    Seal type Type 198 (T-198 / T198)
    Shaft sizes 1/2 in. (12.7mm), 16mm, 20mm and 28mm — select above
    Pump families Ebara EVM, EVMU, EVMW and EVMU/A
    Rotating face Silicon Carbide
    Stationary face Silicon Carbide
    Seal chamber Built to suit non-DIN Ebara seal chamber dimensions
    What you receive 1 × Ebara Type 198 mechanical seal in the size selected. Mechanical seal only — sleeve and set screws not included
    Ebara Type 198 – Seal Reference
    Find your pump in the right-hand column, then select that shaft size above. Every size has silicon carbide faces on both sides.
    Select Faces Fits These Pumps
    1/2 in. (12.7mm) Silicon Carbide / Silicon Carbide Ebara EVMU3
    16mm Silicon Carbide / Silicon Carbide Ebara EVMU/A 10 4, EVMU/A 10 10
    20mm Silicon Carbide / Silicon Carbide Ebara EVM 18, EVMU 18, EVMW 18
    28mm Silicon Carbide / Silicon Carbide Ebara EVM, EVMU and EVMW 28mm builds — call or text to confirm your model
    Not sure which size you need? Call or text 561-414-1046 with a photo of your pump nameplate — no purchase required.

    Have an EVMSU or EVMSUL pump?

    Current Ebara EVMSU and EVMSUL vertical multistage pumps do not take a Type 198. They use a Type 192S — 16mm on the 1, 3 and 5 series, and 20mm on the 10, 15 and 20 series. See our Ebara EVMSU / EVMSUL Type 192S mechanical seal.

    Cross references and alternate part numbers

    • Vulcan Type 198 — the Ebara-chamber version of the Type 192 family

    • Ebara EVM seal, Ebara EVMU seal, Ebara EVMW seal, Ebara EVMU/A seal

    Your number not listed? Call or text 561-414-1046 and we will cross it for you.

    Rebuilding an Ebara multistage pump?We stock seals and repair parts across the Ebara range.

    Doing the job yourself? Read How to Replace a Mechanical Pump Seal.

     

    Weight .3 lbs
    Dimensions 2 × 2 × 1.75 in