Seal Specialists Available — Call or Text Anytime for Technical Support or Part Matching 561-414-1046

ENGINEERED TO FIT. BUILT TO LAST.

my cart
0 items

No products in the cart.

checkout
561.414.1046

HOMA Pump Repair Kits

  • HOMA AK1056-370/77G/C repair kit, 65 mm silicon carbide mechanical seals with Buna-N O-ring set

    HOMA AK1056-370/77G/C Repair Kit65 mm Mechanical Seals & O-Ring Set

    HOMA AK1056-370/77G/C Repair Kit65 mm Mechanical Seals & O-Ring Set

    HOMA AK1056-370/77G/C Repair Kit — 65 mm Mechanical Seals

    The HOMA AK1056-370/77G/C repair kit is a direct-fit rebuild kit for the HOMA AK1056-370/77G/C submersible pump — 65 mm upper and lower mechanical seals in silicon carbide with Viton elastomers, supplied with the complete Buna-N O-ring set. Built to OEM-equivalent standards or higher.

    At a Glance:

    • Shaft Size: 65mm

    • Configuration: Double — upper and lower seal

    • Seal faces: Silicon carbide / silicon carbide (SiC/SiC)

    • Elastomers: Viton (FKM)

    • O-rings: Complete set Buna-N (NBR)

    • Fits: HOMA AK1056-370/77G/C

      HOMA AK1056-370/77G/C is also written AK1056-370 77G/C, AK1056 370/77G/C
      and AK1056-370/77GC.

      Also available: HOMA AK1056-399/1G/C repair kit — 65 mm mechanical seals.

    What’s included:

    • (2) 65 mm OEM-equivalent mechanical seals (upper and lower)

    • Complete Buna-N O-ring kit (all critical O-rings for installation)

    Application

    The AK1056-370/77G/C is a HOMA A-Series submersible sewage pump, and the seal pair is the part that ends the rebuild. Silicon carbide running against silicon carbide is the face combination for wastewater with grit in it — it survives the abrasive load that would groove a carbon face inside a season. Viton elastomers handle the temperature and the chemical exposure of municipal and industrial sump duty. The kit ships with every O-ring needed for the reassembly, so the pump goes back together in one pass instead of waiting on a second order.

    Fits: HOMA AK1056-370/77G/C. Match by full pump model number from the nameplate — HOMA uses the same AK1056 base across builds with different seal sizes. Not sure which one you have? Text a photo of your nameplate to 561-414-1046 and we’ll match it. No purchase required.

    Explore our full line up of Pump Repair Kits

    Looking for more? Check out our Shaft seals,Parts/Accessories & OEM seals  

    Have questions?- Call us anytime-we’re here to help 

    Weight 4 lbs
    Dimensions 6 × 6 × 4 in
  • HOMA AK1056-3991G/C repair kit, 65 mm silicon carbide mechanical seals with Buna-N O-ring set

    HOMA AK1056-3991G/C Repair Kit65 mm Mechanical Seals & O-Ring Set

    HOMA AK1056-3991G/C Repair Kit65 mm Mechanical Seals & O-Ring Set

    HOMA AK1056-3991G/C Repair Kit – 65 mm Mechanical Seals

    The HOMA AK1056-3991G/C repair kit is a direct-fit rebuild kit for the HOMA AK1056-3991G/C submersible pump with the AM303/100/6/36U motor — 65 mm upper and lower HOMA-special mechanical seals in silicon carbide with Viton elastomers, supplied with the complete Buna-N O-ring set. Built to OEM-equivalent standards or higher.

    What’s included

    • 65 mm OEM equivalent Homa special mechanical seal (upper) – Silicon carbide / silicon carbide (SiC/SiC), Viton (FKM)

    • 65 mm OEM equivalent Homa special mechanical seal (lower) – Silicon carbide / silicon carbide (SiC/SiC), Viton (FKM)

    • Buna-N O-ring kit

    Application

    • Pump compatibility: Homa AK1056-3991G/C

    • Motor compatibility: AM303/100/6/36U

    The AK1056-3991G/C is a HOMA AK-series submersible sewage pump on the AM303/100/6/36U motor, the size that runs municipal lift stations and larger industrial sumps. The upper and lower seal pair is what keeps the motor dry once the pump is back down the guide rails. Silicon carbide running against silicon carbide is the face combination for wastewater carrying grit — it takes the abrasive load that grooves a carbon face, which is why HOMA specifies SiC on both sides as standard. Viton elastomers cover the temperature and chemical range of municipal duty. The seals in this kit are the HOMA special design, not a standard-seat seal. Built to OEM-equivalent standards or higher.

    Rebuilding a 65 mm HOMA pump?

    HOMA runs the same AK1056 base across builds that take different seals, so match by your full nameplate model number and confirm the seat style before ordering.

    Not sure which seal material your pump needs? Read How to Choose the Right Mechanical Seal Materials for Your Pump Application.

    Explore our full line up of Pump Repair Kits

    Looking for more? Check out our Shaft seals,Parts/Accessories & OEM seals  

    Have questions?- Call us anytime-we’re here to help 

    Weight 4 lbs
    Dimensions 6 × 6 × 4 in
  • HOMA AK848-380/19.7 repair kit, 55 mm silicon carbide mechanical seals with Buna-N O-ring set

    HOMA AK848-380/19.7 Repair Kit55 mm Mechanical Seals & O-Ring Set

    HOMA AK848-380/19.7 Repair Kit55 mm Mechanical Seals & O-Ring Set

    HOMA AK848-380/19.7 Repair Kit — 55 mm Mechanical Seals & O-Ring Set

    The HOMA AK848-380/19.7 repair kit is a direct-fit rebuild kit for the HOMA AK848-380/19.7 submersible pump with the AM243.23F/C/8/3-3 motor — 55 mm upper and lower mechanical seals in silicon carbide with Viton elastomers, supplied with the complete Buna-N O-ring set. Built to OEM-equivalent standards or higher.

    At a Glance:

    • Shaft Size: 55mm

    • Configuration: Double — upper and lower seal

    • Seal faces: Silicon carbide / silicon carbide (SiC/SiC)

    • Elastomers: Viton (FKM)

    • O-rings: Complete set Buna-N (NBR)

    • Fits pump: HOMA AK848-380/19.7

    • Fits motor: AM243.23F/C/8/3-3

    What’s included:

    • (2) 55 mm OEM-equivalent mechanical seals (upper and lower)

    • Complete Buna-N O-ring kit (all critical O-rings for installation)

    Applications

    The AK848-380/19.7 is a HOMA A-Series submersible sewage pump, and the seal pair is what decides how long the rebuild lasts. Silicon carbide running against silicon carbide is the face combination for wastewater carrying grit — it takes the abrasive load that grooves a carbon face inside a season, which is why HOMA specifies SiC on both sides as standard. Viton elastomers cover the temperature and chemical range of municipal and industrial sump duty. Every O-ring needed for reassembly ships in the kit, so the pump closes back up in one pass instead of waiting on a second order.

    Fits: HOMA AK848-380/19.7 pump, AM243.23F/C/8/3-3 motor. Match by the full model number from the pump nameplate and the motor nameplate — HOMA runs the same base number across builds that take different seal sizes. Not sure which you have? Text a photo of both nameplates to 561-414-1046 and we’ll match it. No purchase required.

    Need the seal on its own? We sell the 55 mm HOMA mechanical seal individually

    Explore our full line up of Pump Repair Kits

    Looking for more? Check out our Shaft seals,Parts/Accessories & OEM seals  

    Have questions?- Call us anytime-we’re here to help 

    Weight 4 lbs
    Dimensions 6 × 6 × 4 in
  • Placeholder

    HOMA AM243.50FC A-12 Seal Kit55 mm & 45 mm Mechanical Seals

    HOMA AM243.50FC A-12 Seal Kit55 mm & 45 mm Mechanical Seals

    HOMA AM243.50FC A-12 Seal Kit – 55 mm & 45 mm Mechanical Seals

    This kit contains the mechanical seals needed to overhaul the seal assembly on a HOMA AM243.50FC A-12 pump. Each component is engineered to meet or exceed OEM performance, ensuring reliable operation and a long service life. **Only the OEM equivalent seals are included—no O-ring kit—**so please confirm compatibility by comparing with your existing seals.

    Compatibility:

    • Pump compatibility: Homa AM243.50FC A-12

    • Motor compatibility: N/A (motor model unknown)

    Materials:

    • Seal faces: Silicon carbide / silicon carbide (SiC/SiC)

    • Elastomers: Viton (FKM)

    • O-rings: None (seals only; O-ring kit not included)

    Note: If you can identify the correct O-rings or have a sample, please call us to see if we have them in stock so we can add them to your order.

    What’s included:

    • 55 mm OEM equivalent mechanical seal (upper)

    • 45 mm OEM equivalent mechanical seal (lower)

    Explore our full line up of Pump Repair Kits

    Looking for more? Check out our Shaft seals,Parts/Accessories & OEM seals  

    Have questions?- Call us anytime-we’re here to help 

    Weight 4 lbs
    Dimensions 6 × 6 × 4 in
  • HOMA AMX434-206/75T/C repair kit, 35 mm silicon carbide mechanical seals with Buna-N O-ring set; HOMA EMS434-210/10.2A/C repair kit, HOMA AMS434-230/13.0ET repair kit, 35 mm

    HOMA AMS434-230/13.0ET Repair Kit35 mm Mechanical Seals & O-Ring Set

    HOMA AMS434-230/13.0ET Repair Kit35 mm Mechanical Seals & O-Ring Set

    HOMA AMS434-230/13.0ET Repair Kit — 35 mm Mechanical Seals & O-Ring Set

    The HOMA AMS434-230/13.0ET repair kit is a direct-fit rebuild kit for the HOMA AMS434-230/13.0ET submersible pump with the AM120.14ET/4/3-1 13 HP motor — 35 mm upper and lower HOMA-special mechanical seals in silicon carbide with Viton secondary seals, supplied with the complete Buna-N O-ring set. Built to OEM-equivalent standards or higher.

    What’s included

    • 35 mm OEM equivalent Homa special mechanical seal (upper) – Silicon carbide / silicon carbide (SiC/SiC), Viton (FKM)

    • 35 mm OEM equivalent Homa special mechanical seal (lower) – Silicon carbide / silicon carbide (SiC/SiC), Viton (FKM)

    • Buna-N O-ring kit

    Applications

    • Pump compatibility: Homa AMS434-230/13.0ET

    • Motor compatibility: AM120.14ET/4/3-1 (13HP)

    The AMS434-230/13.0ET is a HOMA submersible wastewater pump on the 13 HP AM120.14ET motor, the size that runs municipal lift stations and larger industrial sumps. The upper and lower seal pair is what keeps the motor dry once the pump is back down the guide rails. Silicon carbide running against silicon carbide is the face combination for water carrying grit — it takes the abrasive load that grooves a carbon face, which is why HOMA specifies SiC on both sides as standard. Viton secondary seals cover the temperature and chemical range of municipal duty. The seals in this kit are the HOMA special design, not a standard-seat seal. Built to OEM-equivalent standards or higher.

    Fits: HOMA AMS434-230/13.0ET pump, AM120.14ET/4/3-1 (13 HP) motor. HOMA uses multiple seal designs that can share the same shaft size — match by the full model number from the pump nameplate and the motor nameplate, and confirm seat style and thickness before ordering. Not sure which you have? Text a photo of the nameplate and the old seal to 561-414-1046 and we’ll match it. No purchase required.

    Rebuilding a HOMA 434-frame pump?These HOMA models share the 35 mm seal size. HOMA uses more than one seal design at this size, so match by your full nameplate model number:

    Not sure which seal you have? Text or call anytime

    Explore our full line up of Pump Repair Kits

    Looking for more? Check out our Shaft seals, Parts/Accessories & OEM seals  

    Have questions?- Call us anytime-we’re here to help 

    Weight 4 lbs
    Dimensions 6 × 6 × 4 in
  • HOMA AMX434-206/75T/C repair kit, 35 mm silicon carbide mechanical seals with Buna-N O-ring set; HOMA EMS434-210/10.2A/C repair kit, HOMA AMS434-230/13.0ET repair kit, 35 mm

    HOMA AMX434-206/75T/C Repair Kit35 mm Mechanical Seals & O-Ring Set

    HOMA AMX434-206/75T/C Repair Kit35 mm Mechanical Seals & O-Ring Set

    HOMA AMX434-206/75T/C Repair Kit — 35 mm Mechanical Seals & O-Ring Set

    The HOMA AMX434-206/75T/C repair kit is a direct-fit rebuild kit for the HOMA AMX434-206/75T/C submersible pump — 35 mm upper and lower mechanical seals in silicon carbide with Viton elastomers, supplied with the complete Buna-N O-ring set. Built to OEM-equivalent standards or higher.

    What’s included

    • 35 mm OEM equivalent Homa special mechanical seal (upper) – Silicon carbide / silicon carbide (SiC/SiC), Viton (FKM)

    • 35 mm OEM equivalent Homa special mechanical seal (lower) – Silicon carbide / silicon carbide (SiC/SiC), Viton (FKM)

    • Buna-N O-ring kit

    Application

    Pump compatibility: Homa AMX 434-206/75T/C

    The AMX434-206/75T/C is a HOMA AMX-series submersible wastewater pump, and the upper and lower seal pair is what keeps the motor dry once the pump is back in the wet well. Silicon carbide running against silicon carbide is the face combination for water carrying grit — it takes the abrasive load that grooves a carbon face, which is why HOMA specifies SiC on both sides as standard. Viton elastomers cover the temperature and chemical range of municipal and industrial duty. Built to OEM-equivalent standards or higher.

    Fits: HOMA AMX434-206/75T/C. Match by the full model number from the pump nameplate — HOMA runs the same 434 frame across builds that take different seal sizes. Not sure which you have?Text a photo of the nameplate to 561-414-1046 and we’ll match it. No purchase required.

    Rebuilding a HOMA 434-frame pump?These HOMA models share the 35 mm seal size. Check your nameplate against the full model number before ordering:

    Not sure which seal you have? Reach out call or text anytime

    Explore our full line up of Pump Repair Kits

    Looking for more? Check out our Shaft seals,Parts/Accessories & OEM seals  

    Have questions?- Call us anytime-we’re here to help 

    Weight 4 lbs
    Dimensions 6 × 6 × 4 in
  • HOMA AMX444-280/29PL repair kit, HOMA AMX644-260/20P/C repair kit, 45 mm silicon carbide mechanical seals with Buna-N O-ring set

    HOMA AMX444-280/29PL Repair Kit45 mm Mechanical Seals & O-Ring Set

    HOMA AMX444-280/29PL Repair Kit45 mm Mechanical Seals & O-Ring Set

    HOMA AMX444-280/29PL Repair Kit

    The HOMA AMX444-280/29PL repair kit is a direct-fit rebuild kit for the HOMA AMX444-280/29PL submersible pump with the AM204.339 motor — 45 mm upper and lower HOMA-special mechanical seals in silicon carbide with Viton elastomers, supplied with the complete Buna-N O-ring set. Built to OEM-equivalent standards or higher.

    What’s included

    • 45mm OEM equivalent Homa special mechanical seal (upper) – Silicon carbide / silicon carbide (SiC/SiC), Viton (FKM)

    • 45mm OEM equivalent Homa special mechanical seal (lower) – Silicon carbide / silicon carbide (SiC/SiC), Viton (FKM)

    • Buna-N O-ring kit

    Application

    The AMX444-280/29PL is a HOMA AMX-series submersible wastewater pump on the AM204.339 motor. The upper and lower seal pair is what keeps the motor dry once the pump is back in the wet well. Silicon carbide running against silicon carbide is the face combination for water carrying grit — it takes the abrasive load that grooves a carbon face, which is why HOMA specifies SiC on both sides as standard. Viton elastomers cover the temperature and chemical range of municipal and industrial duty. The seals in this kit are the HOMA special design, not a standard-seat seal. Built to OEM-equivalent standards or higher.

    Compatibility:

    • Pump compatibility: Homa AMX444-280/29PL

    • Motor compatibility: AM204.339

    Fitment

    Fits: HOMA AMX444-280/29PL pump, AM204.339 motor. HOMA uses multiple seal designs that can share the same shaft size — match by the full model number from the pump nameplate and the motor nameplate, and confirm seat style and thickness before ordering. Not sure which you have? Text a photo of the nameplate and the old seal to 561-414-1046 and we’ll match it. No purchase required.

    Rebuilding a 45 mm HOMA pump?

    HOMA uses more than one seal design at 45 mm, so match by your full nameplate model number and confirm the seat style before ordering.

    Not sure which seal material your pump needs? Read How to Choose the Right Mechanical Seal Materials for Your Pump Application.

    Weight 4 lbs
    Dimensions 6 × 6 × 4 in
  • HOMA AMX444-280/29PL repair kit, HOMA AMX644-260/20P/C repair kit, 45 mm silicon carbide mechanical seals with Buna-N O-ring set

    HOMA AMX644-260/20P/C Repair Kit45 mm Mechanical Seals & O-Ring Set

    HOMA AMX644-260/20P/C Repair Kit45 mm Mechanical Seals & O-Ring Set

    HOMA AMX644-260/20P/C Repair Kit – 45mm Mechanical Seals

    The HOMA AMX644-260/20P/C repair kit is a direct-fit rebuild kit for the HOMA AMX644-260/20P/C submersible pump — 45 mm upper and lower HOMA-special mechanical seals in silicon carbide with Viton secondary seals, supplied with the Buna-N O-ring set including the O-ring seats for both seals. Built to OEM-equivalent standards or higher.

    What’s included

    • 45mm OEM equivalent Homa special mechanical seal (upper) – Silicon carbide / silicon carbide (SiC/SiC), Viton (FKM)

    • 45mm OEM equivalent Homa special mechanical seal (lower) – Silicon carbide / silicon carbide (SiC/SiC), Viton (FKM)

    • Buna-N O-ring kit

    Application

    The AMX644-260/20P/C is a HOMA AMX-series submersible wastewater pump, and the upper and lower seal pair is what keeps the motor dry once the pump is back in service. Silicon carbide running against silicon carbide is the face combination for water carrying grit — it takes the abrasive load that grooves a carbon face, which is why HOMA specifies SiC on both sides as standard. Viton secondary seals cover the temperature and chemical range of municipal and industrial duty. The seals in this kit are the HOMA special design, not a standard-seat seal, and the kit includes the O-ring seats for both. Built to OEM-equivalent standards or higher.

    Compatibility:

    • Pump compatibility: Homa AMX644-260/20P/C

    • Motor compatibility: N/A (motor model unknown)

    Fitment

    Fits: HOMA AMX644-260/20P/C. HOMA uses multiple seal designs that can share the same shaft size — match by the full model number from the pump nameplate and confirm seat style and thickness before ordering. Not sure which you have? Text a photo of the nameplate and the old seal to 561-414-1046 and we’ll match it. No purchase required.

    Rebuilding a 45 mm HOMA pump?

    HOMA uses more than one seal design at 45 mm, so match by your full nameplate model number and confirm the seat style before ordering.

    Not sure which seal material your pump needs? Read How to Choose the Right Mechanical Seal Materials for Your Pump Application.

    Weight 4 lbs
    Dimensions 6 × 6 × 4 in
  • Placeholder

    HOMA AMX644-360/70 Seal Kit65mm & 55mm Mechanical Seals

    HOMA AMX644-360/70 Seal Kit65mm & 55mm Mechanical Seals

    HOMA AMX 644-360/70 Seal Kit – 65mm & 55mm Mechanical Seals

    This kit includes everything you need to repair a AMX 644-360/70 pump for Homa motor model AM303.75 G/C 4/3-1 FM . It includes OEM-equivalent Homa seals and a Buna O-ring kit for a complete pump repair kit / pump seal kit. Each component is engineered to meet or exceed OEM performance, ensuring reliable operation and a long service life.

    Compatibility:

    • Pump compatibility: Homa AMX 644-360/70

    • Motor compatibility: AM303.75 G/C 4/3-1 FM

    Materials:

    • Seal faces: Silicon Carbide/Silicon Carbide (SiC/SiC)

    • Elastomers: Viton (FKM)

    • O-rings: none (seals only; O-ring kit not included)

    Please note: If you can identify the correct O-rings or have a sample, please call us to see if we have them in stock and we can add them to your order.

    What’s included:

    • 65mm OEM equivalent Homa special mechanical seal (upper)

    • 55mm OEM equivalent Homa special mechanical seal (lower)

    Explore our full line up of Pump Repair Kits

    Looking for more? Check out our Shaft seals , Parts/Accessories & OEM seals  

    Have questions?- Call us anytime-we’re here to help 

    Weight 4 lbs
    Dimensions 6 × 6 × 4 in