Seal Specialists Available — Call or Text Anytime for Technical Support or Part Matching 561-414-1046

ENGINEERED TO FIT. BUILT TO LAST.

my cart
0 items

No products in the cart.

checkout
561.414.1046

3. Pump Repair Kits by Brand

  • Placeholder

    Sulzer ABS Piranha Repair Kit — #61705037 / 61705013 (Seals, O-Rings & Lip Seal)

    Sulzer ABS Piranha Repair Kit — #61705037 / 61705013 (Seals, O-Rings & Lip Seal)

    Item #61705037

    Sulzer ABS Piranha Repair Kit — #61705037 / 61705013 (Seals, O-Rings & Lip Seal)

    The ABS Piranha repair kit (Sulzer #61705037 / 61705013) is a complete seal and O-ring service kit for Sulzer ABS Piranha grinder pumps — the Piranha M50/2–M85/2 (50Hz) and Piranha M50/2–M125/2 (60Hz). Built to OEM-equivalent standards or higher, it supplies the seals, O-rings, and lip seal you replace at a seal service for the same fit and reliability as the original. Bearings and seal cable are not included; they are available separately on request.

    At-a-Glance:

    • Sulzer ABS kit numbers: 61705037 and 61705013

    • Includes O-ring & lip seal kit: 61195037

    • Fits: ABS Piranha M50/2–M85/2 (50Hz), Piranha M50/2–M125/2 (60Hz)

    • Mechanical seals: 11110095 (25mm), 11110096 (30mm), and 11100029 (30mm); Lip seal: 11090017

    • Seal Faces: Carbon/Stainless Steel and Silicon Carbide/Silicon Carbide

    • Kit type: Seal and O-ring service kit

    • Bearings & seal cable: Not included — available on request

    What’s Included:

    • Mechanical seals — 11110095 (25mm), 11110096 (30mm), and 11100029 (30mm); Carbon/Stainless Steel and Silicon Carbide/Silicon Carbide faces

    • Seal rings

    • Lip seal — 11090017

    • O-rings

    Applications

    The Sulzer ABS Piranha is a submersible grinder pump used in pressurized sewage and wastewater systems. This kit fits the Piranha M50/2–M85/2 (50Hz) and Piranha M50/2–M125/2 (60Hz) and covers the parts replaced at a standard seal service. Matching from a worn kit or an old parts list? Confirm your full pump model and serial from the nameplate before ordering, or send a photo to info@sealhouseusa.com, or call/text 561-414-1046. No purchase required — our seal specialists will match it.

    Explore our full line up of Sulzer ABS Pump Repair Kits 

    Looking for more? Check out our Mechanical seals, Parts/Accessories & OEM seals

    Have questions?- Call us anytime-we’re here to help 

    Weight 1.5 lbs
    Dimensions 7 × 5 × 3 in
  • Placeholder

    Sulzer ABS VUPX 0500 PE5 Repair Kit — #61702175-NG2 (ET-SET)

    Sulzer ABS VUPX 0500 PE5 Repair Kit — #61702175-NG2 (ET-SET)

    Item #Parent 61702175-NG2

    Sulzer ABS VUPX 0500 PE5 Repair Kit — #61702175-NG2 (ET-SET)

    The ABS VUPX 0500 PE5 repair kit (Sulzer #61702175-NG2) is a complete seal and O-ring service kit for Sulzer ABS ET-SET VUPX 0500 PE5 NG2 IL pumps. Built to OEM-equivalent standards or higher, it supplies the sealing and hardware components you replace at a seal service for the same fit and reliability as the original. Choose your kit above based on which bearings you need.

    Choose Your Kit:

    • Repair kit only (no bearings) — the complete seal and hardware kit, when you’re reusing or separately sourcing your bearings.

    • Repair kit with bearing — the seal kit plus the standard 7720B.TUP.UA drive-end bearing included.

    • Repair kit with bearing + insulated bearing — the seal kit, the 7720B.TUP.UA bearing, and the special insulated bearing (310E.TUP2.J20A). Priced the same as the “with bearing” option at checkout; because the insulated bearing is a special-order item, we will send a separate invoice for its price and lead time. Please confirm your order details with us so we can source it and confirm timing.

    Important! — Insulated Bearing 
    The insulated bearing (310E.TUP2.J20A) is a special-order part with a lead time. If you select the option that includes it, your checkout total covers the repair kit and standard bearing only — we will follow up with a separate invoice for the insulated bearing’s price and lead time before shipping. Questions? Call or text 561-414-1046 or email info@sealhouseusa.com.

    What’s Included (both variations):

    • (2) Mechanical seals — 11110052

    • Seal rings

    • Radial shaft seal

    • O-rings

    • Shaft nut

    • Lock washer

    • Spacer ring

    • U-seal ring

    • 7720B.TUP.UA Bearing (only included if selected repair kit with bearing — 7720B.TUP.UA)

    • 310E.TUP2.J20A insulated bearing (only included if selected repair kit with bearing + insulated bearing — 310E.TUP2.J20A)

    At-a-Glance:

    • Sulzer ABS kit number: 61702175-NG2

    • Kit type: Seal and O-ring service kit

    • Fits: ABS ET-SET VUPX 0500 PE5 NG2 IL

    • (2) Mechanical seals: 11110052

    • Bearing options: none / with 7720B.TUP.UA / with 7720B.TUP.UA + insulated 310E.TUP2.J20A

    • Insulated bearing: special-order, billed on a separate invoice (lead time)

    Applications 
    The Sulzer ABS VUPX 0500 PE5 is a submersible pump used in municipal and industrial wastewater service, and this kit covers the parts replaced at a standard seal service. Matching from a worn kit or an old parts list? Confirm your full pump model and serial from the nameplate before ordering, or send a photo to info@sealhouseusa.com, or call/text 561-414-1046. No purchase required — our seal specialists will match it.

    Explore our full line up of Sulzer ABS Pump Repair Kits   

    Looking for more? Check out our Mechanical seals, Parts/Accessories & OEM seals

    Have questions?- Call us anytime-we’re here to help

    Weight N/A
    Dimensions N/A
  • Placeholder

    Sulzer ABS VUPX 0800 PE5 Repair Kit — #61702187-NG2

    Sulzer ABS VUPX 0800 PE5 Repair Kit — #61702187-NG2

    Item #N/A

    Sulzer ABS VUPX 0800 PE5 Repair Kit — #61702187-NG2 

    The ABS VUPX 0800 PE5 repair kit (Sulzer #61702187-NG2) is a complete seal and O-ring service kit for Sulzer ABS ET-SET VUPX 0800 PE5 NG2 NB IL pumps. Built to OEM-equivalent standards or higher, it supplies the sealing and hardware components you replace at a seal service for the same fit and reliability as the original. Choose your kit above based on which bearings you need.

    Choose Your Kit:

    • Repair kit only (no bearings) — the complete seal and hardware kit, when you’re reusing or separately sourcing your bearings.

    • Repair kit with bearing — the seal kit plus the standard 7720B.TUP.UA drive-end bearing included.

    • Repair kit with bearing + insulated bearing — the seal kit, the 7720B.TUP.UA bearing, and the special insulated bearing (310E.TUP2.J20A). Priced the same as the “with bearing” option at checkout; because the insulated bearing is a special-order item, we will send a separate invoice for its price and lead time. Please confirm your order details with us so we can source it and confirm timing.

    Important! — Insulated Bearing 
    The insulated bearing (310E.TUP2.J20A) is a special-order part with a lead time. If you select the option that includes it, your checkout total covers the repair kit and standard bearing only — we will follow up with a separate invoice for the insulated bearing’s price and lead time before shipping. Questions? Call or text 561-414-1046 or email info@sealhouseusa.com.

    What’s Included (both variations):

    • (2) Mechanical seals — 11110052

    • Seal rings

    • Radial shaft seal

    • O-rings

    • Shaft nut

    • Lock washer

    • Spacer ring

    • U-seal ring

    • 7720B.TUP.UA Bearing (only included if selected repair kit with bearing — 7720B.TUP.UA)

    • 310E.TUP2.J20A insulated bearing (only included if selected repair kit with bearing + insulated bearing — 310E.TUP2.J20A)

    At-a-Glance:

    • Sulzer ABS kit number: 61702175-NG2

    • Kit type: Seal and O-ring service kit

    • Fits: ABS ET-SET VUPX 0500 PE5 NG2 IL

    • (2) Mechanical seals: 11110052

    • Bearing options: none / with 7720B.TUP.UA / with 7720B.TUP.UA + insulated 310E.TUP2.J20A

    • Insulated bearing: special-order, billed on a separate invoice (lead time)

    Applications 
    The Sulzer ABS VUPX 0800 PE5 is a submersible pump used in municipal and industrial wastewater service, and this kit covers the parts replaced at a standard seal service. Matching from a worn kit or an old parts list? Confirm your full pump model and serial from the nameplate before ordering, or send a photo to info@sealhouseusa.com, or call/text 561-414-1046. No purchase required — our seal specialists will match it.

    Explore our full line up of Sulzer ABS Pump Repair Kits   

    Looking for more? Check out our Mechanical seals, Parts/Accessories & OEM seals

    Have questions?- Call us anytime-we’re here to help

    Weight N/A
    Dimensions N/A
  • Sulzer ABS XFP-PE1 Repair Kit — #61715030 (Upper & Lower Seals + O-Ring Kit)

    Sulzer ABS XFP-PE1 Repair Kit — #61715030 (Upper & Lower Seals + O-Ring Kit)

    Sulzer ABS XFP-PE1 Repair Kit — #61715030 (Upper & Lower Seals + O-Ring Kit)

    Item #61715030

    Sulzer ABS XFP-PE1 Repair Kit — #61715030 (Upper & Lower Seals, O-Rings)

    The ABS XFP-PE1 repair kit (Sulzer #61715030) is a complete seal service kit for Sulzer ABS XFP-PE1 series submersible pumps, including the XFP-PE1-CB-US-NBR with 25mm mechanical seals. Built to OEM-equivalent standards or higher, it supplies the sealing and hardware components you replace at a seal service for the same fit and reliability as the original. This is the limited kit (#61715030) — it does not include bearings or hardware. It is a complete kit for #61195222; bearings and hardware are sold separately on request.

    At-a-Glance:

    • Sulzer ABS kit number: 61715030

    • Fits: ABS XFP-PE1 series (e.g. XFP-PE1-CB-US-NBR)

    • Kit type: Upper and lower seal service kit

    • Upper seal 25mm: 11110197 — Carbon/Silicon Carbide (CAR/SiC)

    • Lower seal 25mm: 11100106 — Silicon Carbide/Silicon Carbide (SiC/SiC)

    • Bearings: Available on request (not included as standard)

    What’s Included:

    • Upper 25mm mechanical seal — 11110197 (Carbon/SiC)

    • Lower 25mm mechanical seal — 11100106 (SiC/SiC)

    • Seal rings

    • Snap ring

    • O-rings

    Bearings 
    Bearings are not included in the standard kit, but we can supply them for your XFP-PE1 on request. Add them to your order by calling or texting 561-414-1046, or email info@sealhouseusa.com and we’ll include the correct bearings for your pump.

    Applications 
    The Sulzer ABS XFP-PE1 is a submersible sewage and wastewater pump used in municipal and industrial lift-station service, and this kit covers the parts replaced at a standard seal service. Matching from a worn kit or an old parts list? Confirm your full pump model and serial from the nameplate before ordering, or send a photo to info@sealhouseusa.com, or call/text 561-414-1046. No purchase required — our seal specialists will match it.

    Explore our full line up of Sulzer ABS Pump Repair Kits 

    Looking for more? Check out our Mechanical seals, Parts/Accessories & OEM seals

    Have questions?- Call us anytime-we’re here to help 

    Weight 1 lbs
    Dimensions 4 × 4 × 3 in
  • Sulzer ABS XFP-PE2 Repair Kit — #61715036

    Sulzer ABS XFP-PE2 Repair Kit — #61715037

    Sulzer ABS XFP-PE2 Repair Kit — #61715037

    Sulzer ABS XFP-PE2 Repair Kit — #61715036 (O-Rings, Seal Rings & Mechanical Seal)

    The ABS XFP-PE2 repair kit (Sulzer #61715036) is a complete O-ring and seal service kit for Sulzer ABS XFP-PE2 series submersible wastewater pumps, including the CB (Contrablock) hydraulic variants such as the XFP-PE2-150E-CBx.x-PE105_4E-FM. Built to OEM-equivalent standards or higher, it supplies the wear parts you replace at every seal service for the same fit and reliability as the original.

    This kit covers the soft parts and sealing components only — O-rings, seal rings, and the mechanical seals — in NBR (Nitrile) for standard wastewater service.

    At a glance:

    • Sulzer ABS kit number: 61715036

    • Fits: ABS XFP-PE2 series, CB (Contrablock) hydraulic

    • Elastomer material: NBR (Nitrile), US spec

    • Example pump model: XFP-PE2-150E-CBx.x-PE105_4E-FM

    What’s Included:

    • Mechanical seals (2) — Upper: #11100168 (replaces #11100108 & #11100107);  Lower: #11110096

    • Seal rings & O-rings — #61195226

    Please note: this kit covers the sealing components only. The seal ring and O-ring kit does not include retaining rings, and basic hardware such as screws, snap rings, and similar fasteners is not supplied. Reuse your existing hardware, or source these parts separately.

    Built for Sulzer ABS XFP-PE2 submersible wastewater pumps running the CB (Contrablock) hydraulic, such as the XFP-PE2-150E-CBx.x-PE105_4E-FM. Not sure this is your exact kit? Confirm your full pump model and serial from the nameplate before ordering, or send a photo to info@sealhouseusa.com, or call/text 561-414-1046. No purchase required — our seal specialists will match it.

    Explore our full line up of Pump Repair Kits

    Looking for more? Check out our Shaft seals, Parts/Accessories & OEM seals

    Have questions?- Call us anytime-we’re here to help 

    Weight 2 lbs
    Dimensions 5 × 5 × 4 in
  • Placeholder

    Sulzer ABS XFP-PE3 Repair Kit — #61705091-NG2 (Seals, O-Rings & Lip Seal)

    Sulzer ABS XFP-PE3 Repair Kit — #61705091-NG2 (Seals, O-Rings & Lip Seal)

    Item #SLZ-XFP-PE3-61705091-NG2

    Sulzer ABS XFP-PE3 Repair Kit — #61705091-NG2 (Seals, O-Rings & Lip Seal)

    The ABS XFP-PE3 repair kit (Sulzer #61705091-NG2) is a complete seal and O-ring service kit for Sulzer ABS XFP-PE3 CB/VX NCJ submersible pumps, including the XFP 150G-CB1.6-PE185/4-60 FM. Built to OEM-equivalent standards or higher, it supplies the sealing and hardware components you replace at a seal service for the same fit and reliability as the original. Bearings are available separately on request.

    At-a-Glance:

    • Sulzer ABS kit number: 61705091-NG2

    • Kit type: Seal and O-ring service kit

    • Fits: ABS XFP-PE3 CB/VX NCJ (e.g. XFP 150G-CB1.6-PE185/4-60 FM)

    • Mechanical seals: 11110227 and 11110228

    • Includes: lip seal / shaft seal

    • Form: Seal and O-ring service kit

    • Bearings: Not included — available on request

    What’s Included:

    • Mechanical seals — 11110227 and 11110228

    • Seal rings

    • O-rings

    • Lip seal / shaft seal

    Bearings 
    Bearings are not included in the standard kit, but we can supply them for your XFP-PE3 on request. Add them to your order by calling or texting 561-414-1046, or email info@sealhouseusa.com and we’ll match the correct bearings for your pump.

    Applications 
    The Sulzer ABS XFP-PE3 is a submersible sewage and wastewater pump used in municipal and industrial lift-station service, and this kit covers the parts replaced at a standard seal service. Matching from a worn kit or an old parts list? Confirm your full pump model and serial from the nameplate before ordering, or send a photo to info@sealhouseusa.com, or call/text 561-414-1046. No purchase required — our seal specialists will match it.

    Explore our full line up of Sulzer ABS Pump Repair Kits   

    Looking for more? Check out our Mechanical seals, Parts/Accessories & OEM seals

    Have questions?- Call us anytime-we’re here to help 

    Weight 2 lbs
    Dimensions 7 × 6 × 3.5 in
  • Placeholder

    Sulzer ABS XFP-PE4 Repair Kit — #61702082 (Seals, O-Rings & Lip Seal)

    Sulzer ABS XFP-PE4 Repair Kit — #61702082 (Seals, O-Rings & Lip Seal)

    Item #SLZ-XFP-PE4-61702082

    Sulzer ABS XFP-PE4 Repair Kit — #61702082 (Seals, O-Rings & Lip Seal)

    The ABS XFP-PE4 repair kit (Sulzer #61702082) is a complete seal and O-ring service kit for Sulzer ABS XFP-PE4 J/M NG2 submersible pumps, including the XFP-PE4-150J-CH2-PE250 and 6J-FM. Built to OEM-equivalent standards or higher, it supplies the sealing and hardware components you replace at a seal service for the same fit and reliability as the original. Bearings are available separately on request.

    At-a-Glance:

    • Sulzer ABS kit number: 61702082

    • Kit type: Seal and O-ring service kit

    • Fits: ABS XFP-PE4 J/M NG2 (e.g. XFP-PE4-150J-CH2-PE250, 6J-FM)

    • Mechanical seals: 11110203 and 11110196

    • Lip seal: 11090048

    • Cap screw: 80 × 12 (12990057)

    • Bearings: Not included — available on request

    What’s Included:

    • Mechanical seals — 11110203 and 11110196

    • Seal rings

    • Lip seal — 11090048

    • Cap screw, 80 × 12 — 12990057

    • O-rings

    Bearings
    Bearings are not included in the standard kit, but we can supply them for your XFP-PE4 on request. Add them to your order by calling or texting 561-414-1046, or email info@sealhouseusa.com and we’ll match the correct bearings for your pump.

    Applications
    The Sulzer ABS XFP-PE4 is a submersible sewage and wastewater pump used in municipal and industrial lift-station service, and this kit covers the parts replaced at a standard seal service. Matching from a worn kit or an old parts list? Confirm your full pump model and serial from the nameplate before ordering, or send a photo to info@sealhouseusa.com, or call/text 561-414-1046. No purchase required — our seal specialists will match it.

    Explore our full line up of Sulzer ABS Pump Repair Kits 

    Looking for more? Check out our Mechanical seals, Parts/Accessories & OEM seals

    Have questions?- Call us anytime-we’re here to help 

    Weight 2 lbs
    Dimensions 6 × 6 × 4 in
  • Placeholder

    Sulzer ABS XRW300 Repair Kit — #61705413 (Seals, O-Rings, Lip Seal & Snap Ring)

    Sulzer ABS XRW300 Repair Kit — #61705413 (Seals, O-Rings, Lip Seal & Snap Ring)

    Item #SLZ-XRW300-61705413

    Sulzer ABS XRW300 Repair Kit — #61705413 (Seals, O-Rings, Lip Seal & Snap Ring)

    The ABS XRW300 repair kit (Sulzer #61705413) is a complete seal and O-ring service kit for Sulzer ABS XRW300 CR pumps. Built to OEM-equivalent standards or higher, it supplies the sealing and hardware components you replace at a seal service for the same fit and reliability as the original. Bearings are available separately on request.

    At-a-Glance:

    • Sulzer ABS kit numbers: 61705413

    • Fits: ABS XRW300 CR

    • Mechanical seals: 11100120 and 11110096

    • Includes: lip seal and snap ring / SI ring

    • Kit type: Seal and O-ring service kit

    • Form: Seal and O-ring service kit

    • Bearings: Not included — available on request

    What’s Included:

    • Mechanical seals — 11100120 and 11110096

    • Seal rings

    • Lip seal

    • O-rings

    • Snap ring / SI ring

    Bearings 
    Bearings are not included in the standard kit, but we can supply them for your XRW300 on request. Add them to your order by calling or texting 561-414-1046, or email info@sealhouseusa.com and we’ll match the correct bearings for your pump.

    Applications 
    The Sulzer ABS XRW300 is a submersible mixer / recirculation unit used in wastewater treatment and mixing applications, and this kit covers the parts replaced at a standard seal service. Matching from a worn kit or an old parts list? Confirm your full model and serial from the nameplate before ordering, or send a photo to info@sealhouseusa.com, or call/text 561-414-1046. No purchase required — our seal specialists will match it.

    Explore our full line up of Sulzer ABS Pump Repair Kits   

    Looking for more? Check out our Mechanical seals, Parts/Accessories & OEM seals

    Have questions?- Call us anytime-we’re here to help 

    Weight 1.5 lbs
    Dimensions 6 × 6 × 4 in
  • Taco 1600 pump repair kit

    Taco 1600 Series Pump Repair Kit — Mechanical Seal, Sleeve & Gaskets (1600-868CRP)

    Taco 1600 Series Pump Repair Kit — Mechanical Seal, Sleeve & Gaskets (1600-868CRP)

    Item #N/A

    Taco 1600 Series Pump Repair Kit — 1600-868CRP

    The Taco 1600 pump repair kit is a direct-fit replacement for Taco 1600 Series in-line circulator pumps, referenced as Taco 1600-868CRP. Supplied complete with the mechanical seal, the brass shaft sleeve 1600-205RP, the gasket set and the left-hand thread mounting bolt — every wear part the rebuild takes, in one box. Built to OEM-equivalent standards or higher.

    Three kits available

    Same kit, same fit — the difference is the seal material inside. Choose your build from the dropdown above.

    • Standard – Carbon/Ceramic/Nitrile — ordinary hot water and chilled water systems

    • Upgrade – Carbon/Ceramic/Viton — hotter systems, glycol and chemicals

    • Upgrade – Silicon Carbide/Viton — gritty water and hard-wearing duty

    What’s included

    • Mechanical seal — in your choice of material

    • Brass shaft sleeve — 1600-205RP

    • Gasket set for reassembly

    • Left-hand thread mounting bolt (matches factory rotation/retention)

    Which kit do I need?

    Most hydronic heating and chilled-water systems take the Standard Kit. Step up to an Upgrade Kit if your system runs hotter, carries glycol or chemicals, or handles gritty water.

    Kit Max Temp Choose This If
    Standard – Carbon/Ceramic/Nitrile 200°F Clean water at neutral pH — ordinary hydronic heating and chilled water loops. This is the standard build.
    Upgrade – Carbon/Ceramic/Viton 450°F Your system runs hot, or carries glycol, bleach or other chemicals that break down standard Nitrile.
    Upgrade – Silicon Carbide/Viton 450°F Gritty or dirty water, wastewater and slurry, or any duty where seals keep wearing out early. Hardest faces we offer.

    Still not sure? Text a photo of your pump nameplate to 561-414-1046 and tell us what the system runs — we’ll tell you which build to order. No purchase required.

    Compatibility

    Taco 1600 Series in-line circulator pumps, 5/8″ (0.625″) seal size. Also referenced for Taco 1900 Series — verify by pump model. Please enter your exact pump model under Pump Model Notes at checkout.

    Rebuilding a Taco circulator?

    We stock seal kits, sleeves and gaskets for the Taco in-line and E-Design ranges, in all three seal material builds.

    Not sure which seal material your system needs? Read How to Choose the Right Mechanical Seal Materials for Your Pump Application

    Explore our full line up of Pump Repair Kits

    Looking for more? Check out our Shaft seals, Parts/Accessories & OEM seals

    Have questions?- Call us anytime-we’re here to help

    Weight 3 lbs
    Dimensions 14 × 14 × 2.5 in